Heavy duty powered lift tables to transport and elevate your heaviest
loads. A heavy duty 12V DC powered unit with deep cycle battery and an
on-board battery charger is standard, a battery charge indicator is
optional. Features 8" phenolic casters (2 swivel and 2 rigid), floor lock,
and patented electric pinch point guards. A hand held pendant control with
an 8 foot coil cord and mounting brackets are available separately. Minimum
frame width is 34". Add 25" to platform length for the overall length.
Standard
Safety Features:
Meets OSHA requirements
Electric pinch point guards
Upward travel limit switch
Lock in place safety maintenance support
Emergency stop if hose breaks
Standard
Specifications:
Heavy duty 12V power unit provides maximum torque for faster lift speeds and minimum amp
draw.
Heavy duty deep cell battery allows maximum use between charges
Cast iron pump with integral valving including pressure relief valve, check valve, down
solenoid valve, and pressure compensation flow control valve.
NEMA-4 pendant hand control has 8' coil cord
Protective battery cover
Displacement style hydraulic actuator - rod end installed down
Hydraulic actuators have internal brass velocity fuse w/ stainless steel spring
Phenolic Casters are 8" x 2", 2 rigid and 2 swivel
Foot actuated floor lock is standard
Conveniently located air bleed screw on hydraulic actuators
Replaceable deck, main axle pins and bearings
Rollers - Cold finished steel with case carburizing to .010 inch with Rockwell
"C" 40
Pins - Cold rolled and finished to bearing manufacturer's specifications
Bearings - Self-lubricating with compressive strength of 44,000 psi
Swaged on high pressure hose fittings, Pump intake/return hose is 1/2"
Welding to meet A.W.S.
Model Number Format PST- (width)(length) - Capacity - Raised Height
Click the
above for Approval Drawing PDF. Click the
for Parts List PDF. (If you have trouble viewing the
PDF in the browser, try "right clicking" the icon and clicking "save target
as" to save the PDF to your preferred location.)
Options
On-board
Battery charger (DC models only)
Remote
Battery Charger (DC models only)
Hydraulic
Foot Pump operation (1000 and 2000 lb. only)
110/220V
1-phase or 230/460V 3-phase AC power unit
above for Approval Drawing PDF. Click the
